Installation of a new 161kV Bay
Amped I has completed the design and engineering of the installation of a new 161kV Bay including revenue metering and DFR additions. This consisted of
AMPED I HAPPENINGS
69kV Relay, Circuit Breaker, and Bus Diff Panel Replacement
Amped I has recently completed the upgrade of relay and replacement of 69kV Circuit Breakers at Kellogg Substation and Sioux City West Substation. Replaced 69kV
Installation of new 115kV to 12kV Substation
Amped I recently completed the installation of a new 115kV to 12kV substation which included design for Microprocessor Relaying, SCADA System, Transformer Monitoring, and Regulator
Montana Wind Farm 230kV Substation Interconnect
Amped I recently completed the P&C design for the installation of new interconnection 230kV substation with three 230kV circuit breakers connecting to two 230kV transmission
300 MVA Transformer Replacement
Amped I has completed turnover of a replacement of a 300 MVA transformer in the downtown of a major metropolitan city. This design included new
Greenfield Substation Design at Calcasieu Pass LNG
Amped I has recently completed the development of relaying for the remote ends from a GIS substation with both line protection and transformer protection. P&C design
345kV/138kV Line Upgrades & Bus Tie
We are also currently continuing work on the installation of a 345/138kV transformer, and 345kV Line package. This work will also include the installation of
115kV Cap Bank & Circuit Switcher
We are working on the installation of a 115kV cap bank at a substation. This Cap will be fed through a Circuit switcher and the
345kV RING BUS SWITCHYARD
Amped I’s electrical division is in the process of completing a new 345kV substation yard. This includes three 345kV breakers in a ring bus configuration
Feeder Relay Upgrade
Amped I is currently working on a 12KV (6) feeder relay upgrades, (4) transformer relay upgrades as well as bus differential protection system on the
Breaker Upgrade With Switchgear Relaying
Amped I recently completed design work for the upgrade of an existing 12kV substation consisting of 41 switchgear cubicles. The project involved installation of 30
Intelligent/Smart Substation Upgrade Program
Amped I designed and engineered P&C for four intelligent substations that were IEC61850 compliant. Each substation had all new relaying with redundant fibers, new batteries, new